HP XP P9500 Storage User Manual
Page 35
Operations to be performed in the next step
•
Setting the operating environment for Smart Manager for Mainframe (setting environment variables
or system symbols)
Related topics
• Settings for using environment configuration commands
• Registering a user SVC using the IEASVCxx parmlib member
• Setting the operating environment for Smart Manager for Mainframe (setting environment variables
• Notes on when registering a user SVC if Business Continuity Manager is installed
• KTALCSVC
Registering a user SVC using the IEASVCxx parmlib member
Statically register a user SVC by defining a user SVC number in the
IEASVCxx
parmlib member.
1.
Choose an unused number between 200 and 255 to be assigned for the user SVC.
2.
Define the following
SYMDEF
statement (
&YKSVCNO
system symbol) in the
IEASYMxx
parmlib
member:
SYMDEF(&YKSVCNO='SVC-number')
For details, see the manual MVS Initialization and Tuning Reference.
3.
To concatenate the load library for LPALIB
HPQKLPAT
to
LPALST
, perform either of the following:
• Define the load library for LPALIB
HPQKLPAT
in the
LPALSTxx
parmlib member. For details,
see the manual MVS Initialization and Tuning Reference.
• Use the
SETPROG LPA
command to dynamically concatenate the load library for LPALIB
HPQKLPAT
to
LPALST
. For details, see the manual MVS System Commands.
4.
Define the following
SVCPARM
statement in the
IEASVCxx
parmlib member:
SVCPARM SVC-number,REPLACE,TYPE(3),EPNAME(JYUASVC),APF(NO),NPRMPT(NO),AR(NO)
For details, see the manual MVS Initialization and Tuning Reference.
To enable registration, you must perform an IPL again with the
CLPA
parameter specified.
CAUTION:
User SVCs are shared between Smart Manager for Mainframe, and Business Continuity Manager.
Therefore, you must be careful when registering a user SVC if you install Smart Manager for Mainframe
for the first time in an environment where Business Continuity Manager is installed.
User Guide
35