HP XP P9500 Storage - Manual (Page 147)

• For the system name 1SYSTEM starting with a number and consisting of more than five char-
acters:
YKS is added to the last five characters YSTEM to create YKSYSTEM .
• For the system names 1SYSTEM and 2SYSTEM , both of which start with numbers and consist
of more than five characters:
YKS is added to the last five characters YSTEM to create YKSYSTEM , which results in two
identical system names. In this case, the system name ( &SYSNAME ) specified for the IEASYSxx
parmlib member must be changed.
For details about system names, see the manual MVS Initialization and Tuning Reference.
DASDONLY(YES)
Specify YES to make the log stream a DASD-only log stream.
MAXBUFSIZE(maxbufsize)
Maximum block size of a log. Specify 64000 (bytes).
STG_SIZE(stg_size)
Specify the size of the staging dataset. Specify a value in the range from 100 (400KB) to 1000
(4MB).
Do not specify this parameter when using an SMS definition.
STG_DATACLAS(stg_dataclas)
Specify the name of the SMS data class used for allocating the DASD staging dataset for this log
stream. Specify this parameter when using an SMS definition.
STG_MGMTCLAS(stg_mgmtclas)
Specify the name of the SMS management class used for allocating the DASD staging dataset
for this log stream. Specify this parameter when using an SMS definition.
STG_STORCLAS(stg_storclas)
Specify the name of the SMS storage class used for allocating the DASD staging dataset for this
log stream. Specify this parameter when using an SMS definition.
LS_SIZE(ls_size)
Specify the size of the DASD log dataset. Specify any size.
The required size depends on the frequency of the output of event log data from the log stream
to a dataset and how event log data is deleted. Specify an appropriate value to prevent the
dataset from being full.
Do not specify this parameter when using an SMS definition.
LS_DATACLAS(ls_dataclas)
Specify the name of the SMS data class used for allocating a log dataset. Specify this parameter
when using an SMS definition.
LS_MGMTCLAS(ls_mgmtclas)
Specify the name of the SMS management class used for allocating a log dataset. Specify this
parameter when using an SMS definition.
LS_STORCLAS(ls_storclas)
Specify the name of the SMS storage class used for allocating a log dataset. Specify this para-
meter when using an SMS definition.
AUTODELETE(YES)
Specify this parameter when automatically deleting event log data.
RETPD(retpd)
Specify this parameter when automatically deleting event log data. Specify the number of days
to retain event log data in the log stream.
User Guide 147