HP XP P9500 Storage - Manual (Page 120)

YKK001I KTINSCHK completed. RC=00,V/R=v.r.m-nn(zz),2013/04/15 09:56:30
KTSLEEP
Function
Suspends the execution of the script for the specified period of time.
Command type
TSO/E command
Format
KTSLEEP
1
{SEC(timeout-value)|MIN(timeout-value)}
Parameters
SEC(timeout-value) ~((1-9999))
Specify the period of time in seconds during which the script is suspended.
MIN(timeout-value) ~((1-9999))
Specify the period of time in minutes during which the script is suspended.
Note
Depending on the priority and operating status of other tasks, the script suspended by the KTSLEEP
command might not operate immediately after the specified time has elapsed.
Return codes
The following table lists and describes the codes returned when the KTSLEEP command terminates.
Table 33 Return codes generated by the KTSLEEP command
Meaning Return code
The command ended normally. 0
Suspension status was canceled due to an interrupt. 8
The command ended due to an invalid parameter. 16
OS console command details
This section describes details about the OS console command type CLI commands. The commands
are explained in alphabetic order.
CLI Commands 120