HP LaserJet Pro CP1525nw Color Printer - Manual (Page 119)

Install memory DIMMs
This product comes with 64-megabyte (MB) random-access memory installed. You can install up to
256-megabyte of memory for the product by adding a dual inline memory module (DIMM). You can also
install a font DIMM to allow the product to print characters (for example, Chinese language or the Cyrillic
alphabet characters).
CAUTION: Static electricity can damage electronic parts. When handling electronic parts, either wear
an antistatic wrist strap, or frequently touch the surface of the antistatic package and then touch bare
metal on the product.
Install memory DIMMs
1. Turn the product off, and then disconnect all power and interface cables.
2. On the right side of the product, open the DIMM access door.
3. To replace a DIMM that is currently installed, spread the latches apart on each side of the DIMM
slot, lift the DIMM up at an angle, and pull it out.
ENWW Manage supplies and accessories 105