HP Deskjet F4240 All-in-One Printer - Manual (Page 62)

Related topics
Control panel buttons
Set the copy paper type
Make multiple copies of the same original
You can set the number of copies from the control panel or from the software that you
installed with the HP All-in-One.
To make multiple copies of an original from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
TIP: For quality copies, ensure that the scanner glass is clean and that there are
no foreign materials adhering to it. For more information, see Clean the glass .
3. Press the Paper Selection button to set the paper type.
4. Press the Start Copy Black or Start Copy Color button to increase the number of
copies up to a maximum of 9 (varies by model). The product starts the copy job after
the last button press.
TIP: Use the software that you installed with the product to set the number of
copies higher than 9.
In this example, the product makes six copies of the original 10 x 15 cm (4 x 6 inch)
photo.
Related topics
Control panel buttons
Make a borderless copy of a photo
To make a borderless copy of a photo, use the 10 x 15 cm (4 x 6 inch) or 216 x 280 mm
(8.5 x 11 inch) HP Advanced Photo Paper.
To make a borderless copy of a photo from the control panel
1. Load photo paper in the input tray. For more information on loading photo paper, see
Load photo paper .
2. Load your original print side down on the right front corner of the glass.
NOTE: When loading a 10 x 15 cm (4 x 6 inch) original, ensure that the longer
side of the original is perfectly aligned with the front edge of the glass.
Perform special copy jobs 59
Us
e the
copy
fea
tures