HP Officejet Pro K5400 Printer User Manual

Page 57

5. Before installing a printhead, shake the printhead up and down at least six times

while the printhead is still in its packaging.

6. Remove the new printhead from its package, and then remove its orange

protective caps.

CAUTION:

Do not shake printheads after the caps are removed.

7. Insert the printhead into its color-coded slot (the label on the printhead must match

the label on the printhead latch). Press down firmly on the printhead to ensure
proper contact.

8. Pull the printhead latch all the way forward, and then press down to ensure that

the latch is properly engaged. You might have to apply some pressure to engage
the latch.

9. Close the cover.
10. Wait while the device initializes the printheads and prints the alignment pages. If

the device does not print the pages, start the alignment process manually. For
more information, see

Maintain the printheads