Anderson Manufacturing AV-9000 - Manual (Page 242)

Section 13 Edition 3
Rev G 13-8
12.Press the to advance to the next parameter, OUTPUT SLEW RATE (only available with PID).
Cx OUTPUT SLEW RATE
0% / MIN
Selections
0 to100%
0 = OFF
SLEW RATE allows the control to slowly ramp the output to avoid a rapid start up. Abrupt changes may set the
outputs to 0%. If the slew rate is programmed to 60%/MIN, the rate of change would be 1%/second.
Press the to change, then or
to desired choice, then press the .