Timer number 1, Tmx display tag timer x – Anderson Manufacturing AV-9000 User Manual

Page 148

Edition 3

Rev G

Section 4

4-63

4.1.8 TIMERS

Timers are seen only if the MATH option was specified and present in the model number order matrix.

From the Normal Display, press the

until CONFIGURATION is seen in the lower display line. If PASS-

WORD appears in the lower display line, the correct "password" will need to be entered before access to Configu-

ration is allowed. If CONFIGURATION is not displayed, then Configuration has been disabled. Refer to Section 9,

Enables and Passwords, for instructions to enable Configuration.

With CONFIGURATION in the display, press the

, then the

until TIMERS appears in the lower display

line.

1. Press the

to display TIMER NUMBER.

2. Press the

to advance to the next parameter, DISPLAY TAG.

TIMER NUMBER

Selections

1 to 4

Press the

to change, then

desired number, then press the

Refer to Section 3.4.2 Changing Text, page 3-3 for

instructions.

TMx DISPLAY TAG

TIMER X

Selections

Text