HP Color LaserJet CP3505 Printer series - Manual (Page 92)

Sleep Delay and Sleep Mode features
The SLEEP DELAY feature determines how long the printer must be inactive before it switches to sleep
mode to reduce power consumption. You can set the length of time before the printer goes into sleep
mode to one of the following settings:
● 1 MINUTE
● 15 MINUTES
● 30 MINUTES (the default setting)
● 45 MINUTES
● 60 MINUTES
● 90 MINUTES
● 2 HOURS
● 4 HOURS
NOTE: The printer display appears dimmed when the printer is in sleep mode. Sleep mode does not
affect printer warm-up time, unless the printer is in sleep mode for more than 8 hours.
Set the sleep delay
1. Press Menu .
2. Press to highlight CONFIGURE DEVICE, and then press .
3. Press to highlight SYSTEM SETUP, and then press .
4. Press to highlight SLEEP DELAY, and then press .
5. Press or to select the appropriate time period, and then press to set the selected time
period.
6. Press Menu to return to the Ready state.
Disable or enable sleep mode
1. Press Menu .
2. Press to highlight CONFIGURE DEVICE, and then press .
3. Press to highlight RESETS, and then press .
4. Press to highlight SLEEP MODE, and then press .
5. Press or to select ON or OFF, and then press to set the selection.
6. Press Menu to return to the Ready state.
80 Chapter 7 Use product features ENWW