Enww control-panel messages 135 – HP Color LaserJet CP3505 Printer series User Manual
Page 147
Control panel message
Description
Recommended action
See
.
If the message persists after clearing all
pages and exiting Help, contact HP Support.
13.XX.YY JAM INSIDE TOP COVER
alternates with
For help press
A page is jammed underneath the front cover. Open the front door and remove any jammed
media.
20 INSUFFICIENT MEMORY
alternates with
For help press
To continue press
The printer has received more data from the
computer than fits in available memory.
1.
Press
to continue printing.
NOTE:
Data will be lost.
2.
Reduce the complexity of the print job to
avoid this error.
3.
Adding memory to the printer may allow
printing of more complex pages.
22 EIO X BUFFER OVERFLOW
alternates with
To continue press
The printer EIO card in slot X has overflowed
its I/O buffer during a busy state.
1.
Press
to continue printing.
NOTE:
Data will be lost.
2.
If the message persists, contact
HP Support.
22 EMBEDDED I/O BUFFER OVERFLOW
The embedded HP Jetdirect print server
buffer has overflowed during a busy state.
1.
Press
to continue printing.
NOTE:
A loss of data will occur.
2.
If the message persists, contact
HP Support.
22 USB I/O BUFFER OVERFLOW
alternates with
To continue press
The printer's USB buffer has overflowed
during a busy state.
1.
Press
to continue printing.
NOTE:
Data will be lost.
2.
If the message persists, contact
HP Support.
40 EIO X BAD TRANSMISSION
alternates with
To continue press
A connection with the card in the EIO slot has
broken.
1.
Press
to continue printing.
NOTE:
Data will be lost.
2.
If the message persists, contact
HP Support.
40 EMBEDDED I/0 BAD TRANSMISSION
alternates with
To continue press
The connection with the HP Jetdirect
embedded print server has broken.
Press
to continue printing.
41.3 UNEXPECTED SIZE IN TRAY X
alternates with
LOAD TRAY X
Media is loaded that is longer or shorter in the
feed direction than the size configured for the
tray.
1.
Press
to print from a different tray.
2.
To print from the current tray, load the
tray with the size and type indicated.
Ensure that all trays are configured correctly
before printing again. See
for more information.
ENWW
Control-panel messages 135