Enww control-panel messages 147 – HP Color LaserJet CP3505 Printer series User Manual
Page 159
Control panel message
Description
Recommended action
USB ACCESSORY ERROR
The printer has detected too much current on
the USB storage accessory.
1.
Turn the printer off.
2.
Remove the USB storage accessory.
3.
Replace the USB storage accessory.
4.
Turn the printer on.
USB Storage
The USB storage device is initializing.
No action necessary.
USB Storage
The USB storage device is not working.
Replace the USB storage device.
USB STORAGE DEVICE FAILURE
alternates with
Ready
To clear press
The USB storage device has failed.
1.
Printing can continue for jobs that do not
require the storage device.
2.
To remove this message from the
display, press
.
3.
If the message persists, turn the printer
off, remove and re-install the storage
device, and then turn the printer on.
4.
If the message persists, replace the
storage device.
USB STORAGE FILE OPERATION FAILED
alternates with
Ready
To clear press
The printer received a PJL file system
command that attempted to perform an
illogical operation (for example, to download
a file to a nonexistent directory).
1.
Printing can continue.
2.
To remove this message from the
display, press
.
3.
If the message reappears, a problem
might exist in the software program.
USB STORAGE FILE SYSTEM IS FULL
alternates with
Ready
To clear press
The printer received a PJL file system
command that attempted to store something
on the file system but was unsuccessful
because the file system is full.
1.
Use HP Web Jetadmin software to
delete files from the storage device, and
then try again.
2.
To remove this message from the
display, press
.
USB STORAGE IS WRITE PROTECTED
alternates with
Ready
To clear press
The file system is protected and no new files
can be written to it.
1.
To enable writing to the storage device,
use HP Web Jetadmin to turn off write
protection.
2.
To remove this message from the
display, turn the printer off and then on.
USB STORAGE X REMOVED
The USB storage accessory was removed
while the printer was turned on.
1.
Turn the printer off.
2.
To continue using the USB storage
accessory, reinstall it.
3.
Turn the printer on.
USE TRAY X
The printer is offering a selection of alternate
media to use for the print job.
1.
Use
and
to highlight a different
size or type, and then press
to select
the size or type.
2.
Press
to return to the previous size
or type.
See
for more
information.
ENWW
Control-panel messages 147