HP Color LaserJet CP3505 Printer series - Manual (Page 149)

Control panel message Description Recommended action
59.XY ERROR
alternates with
To continue turn off then on
A printer motor error has occurred. 1. Turn the printer off and then on.
2. If the message persists, contact
HP Support.
NOTE: This message might also
appear if the transfer unit is missing or
incorrectly installed. Ensure that the
transfer unit is correctly installed.
62 NO SYSTEM No system was found. 1. Turn the printer off and then on.
2. If the message persists, contact
HP Support.
68.X PERMANENT STORAGE FULL
alternates with
To continue press
A non-volatile storage device is full. Press
to clear the message. Printing can
continue, but unexpected behavior could
result.
X Description
1 Removable disk (flash or hard)
0 Onboard NVRAM
1. Press to continue.
2. For 68.0 errors, turn the printer off and
then on.
3. If a 68.0 error persists, contact
HP Support.
4. For 68.1 errors, use the HP Web
Jetadmin software to delete files from
the disk drive.
5. For 68.1 errors that persist, contact
HP Support.
68.X PERMANENT STORAGE WRITE FAIL
alternates with
To continue press
A non-volatile storage device is full. Press
to clear the message. Printing can
continue, but unexpected behavior could
result.
X Description
0 Onboard NVRAM
1 Removable disk
1. Press to continue.
2. If the problem persists, contact
HP Support.
68.X STORAGE ERROR SETTINGS
CHANGED
alternates with
To continue press
One or more printer settings that were saved
in the non-volatile storage device are invalid
and have been reset to the factory default.
Press
to clear the message. Printing can
continue, but unexpected behavior could
result.
1. Press to continue.
2. Turn the printer off and then on.
3. If the message persists, contact
HP Support.
79.XXXX ERROR
alternates with
To continue turn off then on
A critical hardware error has occurred. 1. Turn the printer off and then on.
2. If the problem persists, contact
HP Support.
8X.YYYY EIO ERROR The EIO accessory card has encountered a
critical error. 1. Turn the printer off and then on.
2. If the problem persists, contact
HP Support.
8X.YYYY EMBEDDED JETDIRECT ERROR The HP Jetdirect embedded print server has
encountered a critical error.
1. Turn the printer off and then on.
2. If the problem persists, contact
HP Support.
ENWW Control-panel messages 137