HP Color LaserJet CP3505 Printer series - Manual (Page 70)

5. Press to highlight APPLETALK, and then press .
6. Press to select ENABLE.
7. Press to highlight OFF, and then press .
8. Press Menu to return to the Ready state.
Disable DLC/LLC
1. Press Menu .
2. Press to highlight CONFIGURE DEVICE, and then press .
3. Press to highlight I/O, and then press .
4. Press to highlight EMBEDDED JETDIRECT, and then press .
5. Press to highlight DLC/LLC, and then press .
6. Press to select ENABLE.
7. Press to highlight OFF, and then press .
8. Press Menu to return to the Ready state.
Enhanced I/O (EIO) configuration
NOTE: If you are adding a print server to a base model (HP Color LaserJet CP3505), additional printer
memory might be required.
The enhanced input/output (EIO) slot holds compatible accessory devices, such as the HP Jetdirect
print server network cards or other devices. Plugging an EIO network card into the slot increases the
number of network interfaces available to the printer.
HP Jetdirect EIO print servers
HP Jetdirect print servers (network cards) can be installed in EIO slots. These cards support multiple
network protocols and operating systems. HP Jetdirect print servers facilitate network management by
allowing you to connect a printer directly to your network at any location. HP Jetdirect print servers also
support the Simple Network Management Protocol (SNMP), which provides network managers with
remote printer management and troubleshooting through the HP Web Jetadmin software.
NOTE: Configure the card either through the control panel, the printer installation software, or with
HP Web Jetadmin software. Refer to the HP Jetdirect print server documentation for more information.
58 Chapter 5 Connectivity ENWW