HP Designjet Z3100 Photo Printer series User Manual

Page 67

You may wish to rotate your images by 90 degrees in order to save paper, like this:

You can do this in the following ways:

●

In the Windows driver dialog: select the Features tab, then Rotate by 90 degrees.

●

In the Mac OS Print dialog (PostScript driver): go to the Finishing panel and select Rotate
by 90 degrees.

●

On the Embedded Web Server's Submit Job page: select Advanced settings > Roll
options > Rotate.

●

In the front panel: select the Setup menu icon

, then Printing preferences > Paper >

Rotate.

NOTE:

If rotation is set from your computer, it overrides the setting in the front panel.

NOTE:

When you rotate a job, the page length may be increased to avoid clipping, because

the top and bottom margins are usually larger than the side margins.

CAUTION:

With either rolls or sheets, if you rotate an image to landscape whose original

orientation was portrait, the paper may not be wide enough for the image. For example, rotating
a portrait D/A1-size image on D/A1-size paper by 90 degrees will probably exceed the width of
the paper. If you are using the Embedded Web Server, the preview screen will confirm this with a
warning triangle.

ENWW

Rotate an image

Printing