Front-panel error messages, 16 front-panel error messages, Front-panel errors – HP Designjet Z3100 Photo Printer series User Manual
Page 205
16 Front-panel error messages
Occasionally you may see one of the following messages appear on the front-panel display. If so, please
follow the advice in the Recommendation column.
If you see an error message that does not appear here, and you feel in doubt about the correct response,
contact HP Support. See
Contact HP Support on page 200
.
Table 16-1
Text messages
Message
Recommendation
[Color] cartridge has expired
Replace the cartridge. See
.
[Color] cartridge is missing
Insert a cartridge of the correct color. See
cartridges and printheads on page 117
.
[Color] cartridge is out of ink
Replace the cartridge. See
.
[Color] printhead #[n] error: not present
Insert the correct printhead. See
.
[Color] printhead #[n] error: please remove
Remove the incorrect printhead and insert a new printhead of
the correct type (color and number). See
.
[Color] printhead #[n] error: replace
Remove the non-functional printhead and insert a new
printhead. See
Handling ink cartridges and printheads
[Color] printhead #[n] error: reseat
Remove and reinsert the same printhead, or try cleaning the
electrical connections. If necessary, insert a new printhead.
See
The front-panel display recommends reseating or replacing
.
[Color] printhead #[n] out of warranty
The printhead's warranty has ended, because of the length of
time it has been in operation or because of the volume of ink
used. See Legal Information.
[Color] printhead #[n] warranty warning
The printhead's warranty may be invalidated by the use of the
wrong kind of ink. See Legal Information.
IO error
Restart the printer. If the problem persists, contact HP Support.
See
Contact HP Support on page 200
IO warning
Try again; if the problem persists, contact HP Support. See
Contact HP Support on page 200
.
Paper advance calibration pending
Perform paper advance calibration. See
Paper too small to print paper advance calibration
Unload paper and load larger paper.
Paper too small to scan paper advance calibration
Unload paper and load larger paper.
PDL Error: Ink system not ready
Clean the printheads. See
Clean the printheads on page 179
.
ENWW
195
Front-panel errors