HP Designjet Z3100 Photo Printer series - Manual (Page 42)

12. When the roll is aligned, the front panel displays the Ready message and the printer is ready to
print. If the roll is not aligned, follow the instructions on the front-panel display.
13. If the paper is loose on the roll, lightly rewind from the end of the spindle until tight.
NOTE: If you have an unexpected issue at any stage of the paper loading process, see The paper
cannot be loaded successfully on page 148 .
TIP: When prints fall into the basket, they can be torn or get ink marks from other prints. To avoid
this, catch your prints as they are cut from the roll and do not stack prints in the basket or turn off
the automatic cutter, see
Turn the automatic cutter on and off on page 42 , and use the Form feed
and cut key to release your print.
Paper menu procedure
As an alternative you can use the paper menu to start the paper loading process.
1. Follow steps one through five of the Easy loading procedure on page 29 .
2.
Press the Menu key to return to the main menu, select the Paper menu icon .
3. Select Paper load.
32 Chapter 4 Paper handling ENWW
Pa
per
ha
nd
li
ng