If you still have a problem – HP Designjet Z3100 Photo Printer series User Manual
Page 185
4.
If the problem remains, try cleaning the printhead drop detector. The printer normally notifies you
when this is necessary, but it may be worth trying even if the printer has not suggested it. See
the printhead drop detector on page 180
.
5.
If the problem still remains, replace any persistently faulty printheads (see
Contact HP Support on page 200
If you still have a problem
If you still experience print-quality problems after applying the advice in this chapter, here are some further
things that you can do:
●
Try using a higher print-quality option. See
●
Check the driver you are using to print with. If it is a non-HP driver, consult the driver vendor about
the problem. You could also try using the correct HP driver, if feasible. The latest HP drivers can be
downloaded from
.
●
If you are using a non-HP RIP, its settings may be incorrect. See the documentation that came with
the RIP.
●
Check that your printer's firmware is up to date. See
Update the firmware on page 136
.
●
Check that you have the right settings in your software application.
ENWW
If you still have a problem 175
Prin
t-
qua
lity issues