Paper menu procedure with paper on the roll, Roll out of paper procedure, Load a single sheet – HP Designjet Z3100 Photo Printer series User Manual

Page 44

Paper menu procedure with paper on the roll

If there is paper on the roll, you can also start the process from the paper menu in the front panel's main
menu.

Press the

key to return to the main menu, select the Paper menu icon

Select Unload paper.

Continue from step two of the

Unload paper

key process.

Roll out of paper procedure

If the end of the paper is no longer attached to the roll use the following procedure.

If you have already started the unload process, press the

Cancel

key on the front panel to cancel

that procedure.

Lift the blue lever on the left. If the front panel displays a warning about the lever, ignore it.

Pull out the paper from the printer. Pull from wherever the paper is accessible; the back of the printer
is recommended.

Lower the blue lever.

If the front panel displays a warning message, press the

key to clear it.

Load a single sheet

There are two ways to load a sheet. The easy loading procedure is recommended.

CAUTION:

Any loaded roll or sheet must be unloaded before loading a sheet, see

, and

CAUTION:

For sheets thicker than 0.5mm, you must have space behind the printer equal to the

length of the sheet.

Chapter 4 Paper handling

ENWW

Pa
per

nd
li