HP Designjet Z3100 Photo Printer series - Manual (Page 161)

● For heavyweight coated papers (<200 g/m2), select paper type Bond and Coated >
Heavyweight Coated Paper.
● For cockle-free very thick coated papers (> 200 g/ m2), select paper type Bond and Coated >
Super Heavyweight Coated Paper.
CAUTION: Only use this option if you are sure your paper does not wrinkle when printed.
Photographic paper
For photographic paper, select paper type Photo Paper > Photo Matte Paper. If the print lacks
gamut, select paper type Fine Art Material > Fine Art Paper.
Fine art paper
● For canvases, select paper type Fine Art Material > Canvas.
● For thin fine art paper (<250 g/m2), select paper type Fine Art Material > Fine Art Paper.
● For thick fine art paper (> 250 g/m2), select paper type Fine Art Material > Thick Fine Art
Paper (>250 g/m²). However, if your paper might wrinkle when it is printed, select paper
type Fine Art Material > Fine Art Paper, to prevent wrinkles and damaging the printheads.,
Banners
For banners and signage material, select paper type Fine Art Material > Fine Art Paper.
HP Banners with Tyvek®
For HP Banners with Tyvek®, select paper type Photo Paper > Photo Gloss Paper.
Black ink is easily removed when touched
This happens when your paper is incompatible with matte black ink. To use non-matte black ink, select
paper type Photo Paper > Photo Gloss Paper.
After printing, the paper has wrinkles or there is too much ink
This happens when too much ink is used. To use less ink, select a thinner category. Matte paper categories
from thinnest to thickest are:
● Plain Paper
● Coated Paper
● Heavyweight Coated Paper
● Fine Art Paper
● Super Heavyweight Coated Paper
● Thick Fine Art Paper (>250 g/m2)
For other image quality problems, see Troubleshooting print-quality issues on page 159 .
ENWW The paper type is not in the driver 151
Pa
per
is
sue
s