HP Designjet Z3100 Photo Printer series - Manual (Page 45)

Easy loading procedure
1. Standing in front of the printer, open the sheet tray. If the sheet is long, extend the right extension. If
the sheet is also wide extend the left extension.
TIP: If the tray is difficult to open, try opening from behind the printer.
NOTE: The extensions are seven cm and snap in place.
2. Insert the sheet into the feeder. Load your sheet aligned with the load line and insert until the paper
cannot continue, with thicker sheets you feel resistance. The printer detects the sheet in three seconds.
A countdown begins on the front-panel display.
WARNING! Do not to push your fingers inside the printer's paper path.
3. After the countdown, the paper feeds into the printer. Guide the sheet into the printer; this is especially
important with thicker papers.
4. The front-panel display asks if you are loading a roll or a sheet. Select Sheet with the Up and
Down keys.
ENWW Load a single sheet 35
Paper handling