HP Photosmart C6280 All-in-One Printer - Manual (Page 160)

Paper mismatch
Cause: The print setting for the print job does not match the paper type or size
loaded in the HP All-in-One.
Solution: Change the print setting or load the appropriate paper in the input tray.
For more information, see:
“Change the print settings for the current job” on page 46
“Information on paper” on page 111
Paper mismatch for photo
Cause: The image size for the photo is larger than the paper loaded.
Solution: Replace the paper in the input tray with a larger sized paper. To continue
your print job, press OK on the control panel of the HP All-in-One.
Wrong paper width
Cause: The print setting chosen for the print job does not match the paper loaded
in the HP All-in-One.
Solution: Change the print setting or load the appropriate paper in the input tray.
For more information, see:
“Information on paper” on page 111
“Change the print settings for the current job” on page 46
“Load paper” on page 36
Power and connection messages
The following is a list of power- and connection-related error messages:
• Communication test failed
• HP All-in-One not found
• Improper shutdown
• Two-way communication lost
Communication test failed
Cause: The HP All-in-One is turned off.
Solution: Look at the display on the HP All-in-One. If the display is blank and the
On button is not lit, the HP All-in-One is turned off. Make sure the power cord is firmly
connected to the HP All-in-One and plugged into a power outlet. Press the On button
to turn on the HP All-in-One.
Cause: The HP All-in-One is not connected to the computer.
Errors 159
Trou
bles
ho
ot
ing