HP XP External Storage Software - Manual (Page 73)

•
Inflow Control
Inflow Control specifies if the writing operation to the cache memory is stopped (Enable) or
continued (Disable) when the writing operation to the external volume is impossible.
•
CLPR
When the cache memory is partitioned using XP Disk/Cache Partition, select CLPR used for
accessing to the mapped external volume from the list. The number of SLPR that selected CLPR
belongs is shown at the right of the list. However, when the emulation type for the mainframe
is selected in Emulation Type, you can select only the CLPR that belongs to SLPR number 0.
•
OK button
Saves the settings and closes the dialog box.
•
Cancel button
Cancels the settings and closes the dialog box.
LDEV Mapping (Auto) Dialog Box
Use the LDEV Mapping (Auto) dialog box to specify the LDEV number only to the first LDEV in the
external volume. If you specify the LDEV number to the first LDEV, the subsequent LDEV numbers
are automatically assigned for the rest of LDEVs.
Figure 26 LDEV Mapping (Auto) Dialog Box
Mapping an External Volume Manually 73