HP XP External Storage Software - Manual (Page 163)

login Command
Syntax
login user-ID password
Description
Specifies the login user ID and the password. The svpip command must be written before this
command. If you specify an authentication file when you run the ExPath tool, this command will
be ignored.
Parameters
Description Parameter
Specifies the user ID of Remote Web Console. user-ID
Specifies the password for the user ID of Remote Web
Console. password
Example
The following example uses root as a user name and password as a password:
svpip 158.214.127.170
login root password
disconnect Command
Syntax
disconnect ExG-VPG[ ExG-VPG...]
Description
Disconnects external volumes. This command executes the same operation as the Disconnect External
Volumes command which you perform by using the Volume Operation window. After the disconnect
command is performed, only the external storage system can access the external volumes.
The disconnect command cannot be performed if the external volume is configured as a P-VOL or
S-VOL for the copy program products. See
(page 91) for required operations and notes to perform
the disconnect command.
The sample file
disconnect.txt is provided for your use.
Parameters
Description Parameter
ExG specifies the external volume group in the range of
E1 to E16384. VPG specifies the serial number within an
external volume group in the range of 1 to 4096.
ExG-VPG
Example
The following example disconnects the E1-1 and E1-2 external volumes:
disconnect E1-1 E1-2
Command Reference 163