HP XP External Storage Software - Manual (Page 135)

Table 34 System Parameters (AMS/WMS) (continued)
Parameter Settings Parameters Window Names
Set this parameter to Standard Mode. Host Connection Mode 1 Host Connection Mode
Do not specify any parameters.
NOTE: As for AMS 1000, AMS 500, AMS
200, and WMS 100, do not specify HISUP
OFF mode, either.
Host Connection Mode 2
Relationship between the Serial Number and the AMS/WMS Model
When the external storage system is the AMS or WMS storage system, you can identify the storage
system model from the serial number displayed in the Serial Number column in the Volume Operation
window.
Table 35 (page 135) describes the relationship between the serial number displayed in the Serial
Number column and the storage system model.
Table 35 Relationship between the Serial Number and the AMS/WMS Model
Model Displayed Serial Number Storage System
AMS 2500 87XXXXXX AMS
AMS 2300 85XXXXXX
AMS 2100 83XXXXXX
AMS 1000 77XXXXXX
AMS 500 75XXXXXX
AMS 200 73XXXXXX
WMS 100 71XXXXXX WMS
NOTE: In serial numbers, X is an arbitrary number or character.
Relationship between the WWN of the Port and Controller (AMS/WMS)
When the external storage system is the AMS or WMS storage system, you can identify the controller
(controller 0 or controller 1) from the WWN of the port.
Table 36 (page 135) describes the relationship between WWN of port and controller.
Table 36 Relationship between the WWN of the Port and Controller (AMS/WMS)
WWN of the Port Controller Model
XXXXXXXXXXXXXXX0 Controller 0 AMS 200
WMS 100
XXXXXXXXXXXXXXX1 Controller 1
XXXXXXXXXXXXXXX0
XXXXXXXXXXXXXXX1
Controller 0 AMS 2100
AMS 500
XXXXXXXXXXXXXXX2
XXXXXXXXXXXXXXX3
Controller 1
AMS/WMS Storage System 135