HP Designjet Z3200 PostScript Photo Printer series - Manual (Page 89)

Printing in color
You can adjust the colors of your print in similar ways under Windows and Mac OS:
● In the Windows driver dialog: select the Color tab, ensure that the Advanced color
adjustments box is checked, then press the Settings button beside it.
● In the Mac OS Print dialog (PostScript driver): select the Color Options panel, then Lightness
and Hue.
● In the Mac OS Print dialog (PCL3 driver): select the Paper Type/Quality panel, then Lightness
and Hue.
Under either operating system, you will then be able to make adjustments using a lightness slider and
three color sliders.
● The lightness slider simply makes the whole print lighter or darker.
● The color sliders can be used to fade or emphasize each of the primary colors in the print. The
primary colors may be red, green and blue; or cyan, magenta and yellow; depending on the color
model used in the image.
The Reset button restores each slider to its default central position.
Printing in grayscale
You can adjust the gray balance of your print in similar ways under Windows and Mac OS:
● In the Windows driver dialog: select the Color tab, ensure that the Advanced color
adjustments box is checked, then press the Settings button beside it.
● In the Mac OS Print dialog (PostScript driver): select the Color Options panel, then Gray
balance.
● In the Mac OS Print dialog (PCL3 driver): select the Paper Type/Quality panel, then Gray
balance.
Under either operating system, you will then be able to make adjustments using separate controls for
highlights, midtones and shadows.
ENWW Color adjustment options 79
Color ma
nagem
e
nt