HP Designjet Z3200 PostScript Photo Printer series User Manual

Page 54

Text mode
Original mode

Alternatively, you can use the

and

Down

keys to remove more or less of the paper (minimum 2

inches). Open the window to see where the cut will be made, indicated by a scissors label at the side
of the carriage. The window can remain open while you are moving the paper. When you have finished
moving the paper, close the window and press the

key.

NOTE:

The printer may not cut the paper immediately, as the printheads are serviced after each print

and the paper cannot be cut until that process is complete.

When the paper has been cut, remove the cut piece from the output tray.

NOTE:

If strips or short prints are left in the output tray the printer could jam.

NOTE:

Photo and coated paper requires careful handling, see

The print is scuffed or scratched

on page 154

Chapter 4 Paper handling

ENWW

ape
r ha
n

lin