Unload a roll, Unload paper key procedure with paper on the roll, Paper menu procedure with paper on the roll – HP Designjet Z3200 PostScript Photo Printer series User Manual
Page 42
3.
Select Paper load.
4.
Select Load roll.
5.
Continue with step 9 of the easy loading process (see
Select your paper category and type.
).
Unload a roll
Before unloading a roll, check whether there is paper on the roll or whether the end of the paper is no
longer attached to the roll, and follow the appropriate procedure as described below.
TIP:
Do not touch the paper while the printer is printing, as it causes image quality defects.
Unload paper key procedure with paper on the roll
If there is paper on the roll, use the following procedure.
1.
Press the
Unload paper
key on the front panel.
2.
When prompted by the front-panel display, lift the blue lever on the left.
3.
When prompted by the front-panel display, lightly rewind the paper from the end of the spindle until
removed from the printer.
4.
When prompted by the front-panel display, lower the blue lever.
Paper menu procedure with paper on the roll
If there is paper on the roll, you can also start the process from the front panel.
1.
Select the Paper menu icon
.
32
Chapter 4 Paper handling
ENWW
P
ape
r ha
n
d
lin
g