HP Designjet Z3200 PostScript Photo Printer series - Manual (Page 129)

8. To remove a printhead, lift up the blue handle.
9. Using the blue handle, use steady force to disengage the printhead.
10. Pull the blue handle upward until the printhead is released from the carriage.
CAUTION: Do not pull abruptly because this can damage the printhead.
11. The front-panel display identifies the missing printhead.
Insert a printhead
1. If the printhead is new, shake the printhead vigorously before removing the protective caps.
ENWW Insert a printhead 119
Ink
and
p
ri
n
thea
ds