HP Designjet Z3200 PostScript Photo Printer series - Manual (Page 23)

3. Open the CD icon on your desktop.
4. Open the Mac OS X HP Designjet Installer icon.
5. Follow the instructions on your screen. You are recommended to use the Easy Install option, which
will install the PostScript printer driver. If you would like to install the PCL3 (raster) driver, select
Custom Installation.
6. The printer software is installed, including the printer driver and the HP Printer Utility.
7. When the software has been installed, the HP Printer Setup Assistant starts automatically, to set
up a connection to your printer. Follow the instructions on your screen.
8. When you reach the Select Printer screen, look for your printer's mDNS service name (which you
noted in step 1) in the Printer Name column.
● If you find the right printer name, scroll sideways to see the Connection Type column, and
check that it shows Bonjour/Rendezvous. Then highlight that line. Otherwise, continue
searching further down the list.
● If you cannot find your printer name with a Bonjour/Rendezvous connection type, check the
box My printer is not in the list.
ENWW Connect to a network (Mac OS) 13
S
o
ft
wa
re inst
all
a
ti
on