HP Integrity NonStop H-Series - Manual (Page 28)

12. Log on to the Host by performing the following steps:
a.
From the Host name: list, select the IP address of a host system where you want to place
the selected product.
NOTE: If the IP address of a Host system is not available in the Host name: list, type
the IP address.
b. Enter a user name and password.
c. Select the communication mode.
NOTE: Starting with T0316H01^AAK (version 4.1.00.0), IPSetup supports two modes
of communication: Telnet and Secure SHell (SSH). To use the SSH mode of communication,
ensure that the SSH server is configured correctly and is running on the NonStop server.
If the SSH server is not configured or not running on the NonStop server, you will not be
allowed to proceed with this mode of communication.
For a secure mode of communication, select SSH. Otherwise, accept the default Telnet,
which sends data in an unsecure mode.
For Telnet mode, enter the logon service that will call the Safeguard prompt. The default
service is TACL.
28 Installing NSASJ