HP LaserJet 2300 Printer series - Manual (Page 158)

156 B Control panel menus ENWW
JAM RECOVERY * AUTO
OFF
ON
Determines how the printer behaves if a jam occurs.
AUTO : The printer automatically selects the best mode for
printer jam recovery (usually ON ).
OFF: The printer does not reprint pages following a jam.
Printing performance might be increased with this
setting.
ON : The printer automatically reprints pages after a jam is
cleared.
RAM DISK *AUTO
ON Determines how the RAM disk is configured. (This item
does not apply to printers with only 32 MB of RAM, such
as the base HP LaserJet 2300L printer and
HP LaserJet 2300 printer.)
AUTO : Allows the printer to determine the optimal
RAM-disk size based on the amount of available memory.
OFF: The RAM is disabled.
Note
If you change the setting from OFF to AUTO , the printer
automatically reinitializes when it becomes idle.
LANGUAGE * ENGLISH
Several
Selects the language for the messages that appear on
the printer control panel display.
Item Values Explanation