HP LaserJet 2300 Printer series - Manual (Page 112)

110 Chapter 4 Problem solving ENWW
Printing errors
A print job was not sent to
the printer that you wanted. Another printer with the
same or similar name might
have received your print job. Check the AppleTalk name of the printer
displayed on the configuration page.
Make sure that the cables are connected
correctly, that the printer is on, and that the
R EADY light is on.
You cannot use the
computer while the printer is
printing. Background Printing has
not been selected. LaserWriter 8.3
Turn Background Printing on in the
Chooser. Status messages will now be
redirected to the Print Monitor, allowing you
to continue working while the computer is
processing data to be sent to the printer.
LaserWriter 8.4 and later
Turn Background Printing on by selecting
File, Print Desktop, and Background
Printing.
An encapsulated PostScript
(EPS) file does not print with
the correct fonts. This problem occurs with
some software programs. Try downloading the fonts contained in the
EPS file to the printer before printing.
Send the file in ASCII format instead of
binary encoding.
Your document is not
printing with New York,
Geneva, or Monaco fonts. Select Options in the Page Setup dialog
box to deselect substituted fonts.
Symptom Possible cause Solution