Duplexer area, I/o submenu, Duplexer – HP LaserJet 2300 Printer series User Manual
Page 103
ENWW
Clearing jams 101
Duplexer area
This procedure applies only to printers that include a built-in duplexer
(HP LaserJet 2300d printer, HP LaserJet 2300dn printer, and
HP LaserJet 2300dtn printer).
1
Remove tray 2 from the printer.
2
Pull the green lever on the left front of the tray 2 opening to open the
paper access plate.
3
Reach in and pull out the jammed paper.
4
Push the bottom of the paper access plate back up until it clicks into
place on both sides (both sides need to be engaged).
5
Reinstall tray 2.
6
To reset the printer and continue printing, open the top cover all the
way and then close it.
Note
If the
A
TTENTION
light does not go out, jammed media remains inside
the printer. Check the paper-feed and rear-output areas for jams.
1
2
3
4
5