Use scan, Scan methods, Scan from the pc – HP Color LaserJet CM2320 Multifunction Printer series User Manual
Page 112: Scan from the product, Use the scan feature, Scan methods use the scan feature
Use scan
Scan methods
Scan jobs can be performed in the following ways.
●
Scan from the computer by using HP LaserJet Scan (Windows)
●
Scanning by using HP Director (Macintosh). See
●
Scan from the product
●
Scan from TWAIN-compliant or Windows Imaging Application (WIA)-compliant software
NOTE:
To learn about and use text-recognition software, install the Readiris program from the
software CD-ROM. Text-recognition software is also known as optical character recognition (OCR)
software.
Scan from the PC
1.
In the HP program group, select Scan to start HP LaserJet Scan.
NOTE:
Pressing
Start Scan
on the product control panel also starts HP LaserJet Scan.
2.
Choose the action that you want to accomplish.
●
Select a destination to begin scanning immediately.
●
Select Scan after prompting me for settings to specify additional settings before you begin
scanning.
●
Select Set up the device to program scan destinations for scanning directly from the device.
This functionality is available under the
Scan
menu on the device.
3.
Click OK.
NOTE:
OK should indicate the action that you want to accomplish.
Scan from the product
Scan directly from the product by using the control-panel scan buttons. Press
Start Scan
or
Scan
Menu
to scan to a folder (Windows only) or to scan to e-mail.
Use the Scan feature
●
Scanning from the product control panel is only supported with a full software installation.
HP ToolboxFX must be running to scan by using the
Scan Menu
button or the
Start Scan
button.
●
For the best scan quality, place your originals onto the flatbed scanner, rather than loading them
into the automatic document feeder (ADF) input tray.
●
The computer that is connected to the product must be turned on.
100 Chapter 11 Scan
ENWW