Updating firmware, Drivers – HP ProLiant ML110 G2 Server User Manual
Page 94
Troubleshooting 94
Updating firmware
To verify the firmware version, use HP Insight Diagnostics (on page
To update the firmware:
1.
Check the firmware version on the device.
2.
Determine the latest firmware version available.
3.
If a TPM is installed and enabled on the server, disable BitLocker™ before updating the firmware. For
more information, see the operating system documentation.
4.
Update the firmware to the current version supported for the hardware configuration.
5.
Verify the firmware update by checking the firmware version.
6.
If a TPM is installed and enabled on the server, enable BitLocker™ after the firmware update is
complete. For more information, see the operating system documentation.
Drivers
HP drivers and utilities can be found on the Easy Set-up CD or the support CD. For the latest drivers and
information on supported operating systems, refer to the HP website
IMPORTANT:
Always perform a backup before installing or updating device drivers.