beautypg.com

Software problems, Operating system problems, Operating system locks up – HP ProLiant ML110 G2 Server User Manual

Page 89: General protection fault occurs, Errors are displayed in the error log

background image

Troubleshooting 89

Problems are occurring with the network interconnect blades

Action: Be sure the network interconnect blades are properly seated and connected.

Software problems

The best sources of information for software problems are the operating system and application software

documentation, which may also point to fault detection tools that report errors and preserve the system

configuration.
Other useful resources include HP Insight Diagnostics (on page

48

) and HP SIM. Use either utility to gather

critical system hardware and software information and to help with problem diagnosis.

Operating system problems

Operating system locks up

Action: Scan for viruses with an updated virus scan utility.

General protection fault occurs

A general protection fault, or general protection error, occurs when the Microsoft operating system
terminates suddenly with an error, including but not limited to:

Miscalculating the amount of RAM needed for an allocation

Transferring execution to a segment that is not executable

Writing to a read-only or a code segment

Loading a bad value into a segment register

Using a null pointer

A GPF is immediately identifiable by a blue screen with white text, and the text may contain information that

identifies the problem.
Action:

Remove any newly installed software or hardware to verify that they are not the cause.

Boot the server in Safe Mode or Last Known Good Configuration.

If neither of these actions resolve the problem, contact an authorized service provider. For more information

about debugging tools or specific GPF messages, refer to the Microsoft website

(

http://www.microsoft.com/whdc/devtools/debugging/default.mspx

).

Errors are displayed in the error log

Action: Follow the information provided in the error log, and then refer to the operating system
documentation.

Problems occur after the installation of a service pack

Action: Follow the instructions for updating the operating system ("

Operating system updates

" on page

90

).