HP ProLiant ML110 G2 Server - Manual (Page 32)

Hardware options installation 32
• HP Smart Array E200 controller card
Cabling a controller card (ML110 G5, ML115, ML115 G5, and ML150 G5)
1. Power down the server (on page 6 ).
2. Remove the access panel (" Access panel " on page 11 ).
3. Install the storage controller card.
For more information, see the documentation that ships with the option and see "Expansion board
options (on page
42 )."
4. Connect the LED cable to the storage controller card.
5. Secure the cable with the cable clamp.
6. Connect the LED cable to the system board.
o HP ProLiant ML110 Generation 5 Server