HP ProLiant ML110 G2 Server - Manual (Page 19)

Hardware options installation 19
IMPORTANT: If installing a processor with a faster speed, update the system ROM before
installing the processor.
To install the component:
1. Power down the server (on page 6 ).
2. Remove the access panel (" Access panel " on page 11 ).
3. Remove the heatsink fan and the heatsink. For more information, see the server installation sheet.
CAUTION: Failure to completely open the processor locking lever prevents the processor from
seating during installation, leading to hardware damage.
4. Open the processor locking lever.
5. Install the processor.
6. Close the processor locking lever.