HP StoreOnce Backup - Manual (Page 65)

TIP: Click show/hide details box to check how many target appliances are permitted and
the number of target appliances currently configured.
6. Select a Target Appliance from the list and click Next.
NOTE: To select an appliance not yet on the list, click Add Target Appliance. Enter the Target
Appliance IP Address or fully qualified domain name. The default values for the Command
and Data Protocol Port Numbers cannot be edited. (If replication takes place through a firewall,
the network administrator must open (TCP) ports 9387 (Command protocol) and 9388 (Data
protocol) to allow the replication traffic to pass to and from the HP StoreOnce Backup systems.)
Click Add Target Appliance.
See How do I identify the IP address of a service set? (page 51) .
7. The wizard then moves to the Select Target Library step. Select a library on the target appliance
and click Next.
VT Mappings (Replication) 65