HP Lights-Out 100 Remote Management - Manual (Page 52)

• For applications such as PuTTY with Linux redirection:
1.
Click Connection>Telnet.
2. Clear Return key sends Telnet New Line instead of ^M.
LO100 has a default of 0x08 (input) and 0x03 (output) filter setting that must not be changed. If
the default settings are changed, functionality issues might occur and you must restore the default
settings. After the defaults are reset, you must log out and back in to the shell to restore normal
functionality. To restore the default settings, use the following IPMI commands for your
environment and operating system:
• To set telnet inbound to 0x08:
— CLP: oemhp I 20 c0 20 18 00 29 01 00 00 02 00 08 b4
— DOS: ipmitool 20 c0 29 01 00 00 02 00 08
— Linux: ipmitool raw 0x30 0x29 0x01 0x00 0x00 0x02 0x00 0x08
• To set telnet outbound to 0x03:
— CLP: oemhp I 20 c0 20 18 00 29 01 00 00 02 01 03 b8
— DOS: ipmitool 20 c0 29 01 00 00 02 01 03
— Linux: ipmitool raw 0x30 0x29 0x01 0x00 0x00 0x02 0x01 0x03
52 Using LO100