HP Lights-Out 100 Remote Management - Manual (Page 25)

Specific commands
CLP syntax for specific commands is found in the sections that also describe the functionality
through the Web interface.
DCMI 1.0 support
LO100 supports Data Center Manageability Interface (DCMI). DCMI enables you to simplify
platform management implementations while enhancing robustness. Specifications are derived
from Intelligent Platform Management Interface (IPMI) 2.0, which has been widely adopted by
the computing industry for server management and system-health monitoring. For more
information, see the Intel website (
http://developer.intel.com/technology/product/DCMI/
index.htm ).
IPMI 2.0 support
LO100 supports the industry-standard IPMI 2.0. The IPMI specification defines standardized,
abstracted interfaces that can be used for monitoring and control functions that are built in to
the platform hardware.
In addition to supporting the mandatory commands for IPMI 2.0, the following additional IPMI
2.0 features are supported by LO100:
• Additional IPMI 2.0 commands
— Get Channel Cipher Suites
— Set/Get Channel Security Keys
— Suspend/Resume Payload Encryption
• Payload types
— IPMI Message
— RMCP+ Open Session Request/Response
— RAKP Message 1 / 2
— RAKP Message 3 / 4
• Authentication algorithms
— RAKP-none
— RAKP-HMAC-SHA1
• Integrity algorithms
— None
— HMAC-SHA1-96
• Confidentiality algorithms
— None
— AES-CBC-128
Logging in to LO100
You can log in to the remote management processor through a web browser or through the CLP.
If you are unsure of your DHCP IP address, refer to the "Configuring network access" section.
Logging in through a web browser
1. Browse to the IP address of the remote management processor to access the login screen.
2. Enter your user name and password. The default user name for the Administrator account
is admin, and the default password is admin. The default user name for the Operator account
is Operator, and the default password is Operator.
DCMI 1.0 support 25