HP Lights-Out 100 Remote Management - Manual (Page 22)

show [][][]
◦ /./->
— Help for targets
Calling help for a target returns any information about the target and its contents. You
can call help for any target that is not contained in the current directory (help map1
can be called from system1).
◦ /./-> system1 -h
Invalid command
◦ /./-> system1 -help
Invalid command
◦ /./-> help system1
Host System Directory
◦ /./-> help map1
Management Service Processor Directory
◦ /./-> cd system1
◦ /./system1/-> help map1
Management Service Processor Directory
— Help for properties
Calling help for a property or any other option for which there is no help information
returns an [Unsupported Command] or [Invalid command] message. For example:
/./system1/-> show
/./system1
Targets
oemhp_sensors
oemhp_frus
log1
led1
console 1
Properties
name=Hewlett-Packard
enabledstate=enabled
Verbs
cd
version
exit
show
reset
start
stop
help
/./system1/-> help name
Unsupported Command
/./system1/-> help enabledstate
Unsupported Command
/./system1/-> help properties
Unsupported Command
/./system1/-> name -h
Invalid command
/./system1/->
• The exit command terminates the CLP session.
22 Using LO100