HP Integrity NonStop H-Series - Manual (Page 62)

Using NonStop Storage Analyzer
WVP NonStop Storage Analyzer User Guide – 536988-001
- 62 -
4-3 Filtering based on Alerts
This section explains how to filter the display using the various alert levels.
4-3-1 Overview
Selecting alerts from the Alert Filter will update the Central Display. Users can check the alert
level(s) they wish to view and click on the Apply button.
Description of these Alert icons can be found
here .
4-3-2 Description
Based on the type of alert selection done, the Central Display will be updated and only the disks
with the selected alerts will be displayed. A “None” option is also available so that disks without any
alerts can be displayed. By default, everything is selected and all disks are displayed. This filter only
applies at the node level. In other words, only disks for a given node can be filtered on the basis of
Alerts.
Figure 4-44 Alert Filter Archive
[Back to TOC]