HP e-PC c10s10 - Manual (Page 57)

57
6 Advanced System Tests
How to Run an Advanced System Test
How to Run an Advanced System Test
To perform an advanced test:
1 Highlight the test by using the keyboard arrow keys, then select the test by pressing
the Enter key or the keyboard space bar.
If you have an HP Notebook, you can select more than one test at a time.
Some tests may not be available for your HP computer. These will appear in grey.
2 Select loop mode (if you want to run the test many times) by pressing F12 . Loop
mode is very useful if there are intermittent problems with a component.
You can press
F12 again to deselect loop mode.
3 Press F2 to start the test.
Example of a
test without
loop mode