HP e-PC c10s10 - Manual (Page 18)

2 Starting e-Diagtools
Before Starting e-Diagtools
18 English
Before Starting e-Diagtools
This section applies to HP Business PCs and Workstations. If you have an HP Notebook
PC, you can ignore this section.
Before you start e-Diagtools, do the following:
1 Enter the computer’s BIOS Setup program.
• To enter the Setup program on new HP Business PCs, restart the computer, press
F8 when the logo screen appears, then press F2 .
• To enter the Setup program on other HP computers (including HP Notebook PCs),
restart the computer and press
F2 when the HP logo appears.
2 If present, ensure all Hardware Protection items in the Security menu are set to
Enabled or Unlocked .
3 If you are using a CD-ROM to run e-Diagtools, ensure the option to start from the
CD-ROM is enabled and the CD-ROM is configured to be the first device to boot from.
After running e-Diagtools, you can restore the original Setup values on your computer.