HP e-PC c10s10 - Manual (Page 34)

3 Updating the BIOS and Sending the Support Ticket
Advanced Users: Setting Up the e-Features
34 English
Advanced Users: Setting Up the e-Features
This section is recommended for advanced users.
HP Notebook PCs If you have an HP Notebook computer, refer to chapter 8, “e-Diagtools for Windows“ for
all information about setting up and using e-features.
Before You Begin
Before you begin, your computer should have the HP Utility Partition on the hard disk
(or e-Diagtools on CD-ROM if you do not need to use the e-Diagtools BIOS update
feature).
Step 1: Open the e-Diagtools Networking Parameters Screen
You can do this by running e-Diagtools as usual (for instructions, refer to chapter 2,
“Starting e-Diagtools“), then clicking the menu option to update the BIOS or send the
Support Ticket. The Networking Parameters screen will open automatically.