HP 9000 Virtual Library System - Manual (Page 189)

Front Panel LEDs and Buttons
Status Description Item
Blue = Identification is activated. UID button/LED 1
Flashing blue = System is being remotely managed.
Off = Identification is deactivated.
Green = System health is normal. System health LED 2
Amber = System health is degraded. To identify the
component in a degraded state, see
HP Systems
Insight Display LEDs and Internal Health LED
Combinations
.
Red = System health is critical. To identify the
component in a critical state, see
HP Systems Insight
Display LEDs and Internal Health LED Combinations .
Off = System health is normal (when in standby
mode).
Green = System is on. Power On/Standby button and system power LED 3
Amber = System is in standby, but power is still
applied.
Off = Power cord is not attached, power supply
failure has occurred, no power supplies are installed,
facility power is not available, or the power button
cable is disconnected.
VLS9200 High Performance Node Components, LEDs, and Buttons 189