HP StorageWorks All-in-One SB600c Storage Blade - Manual (Page 45)

• In the Action pane, click Properties and then select the Data Protection tab.
3. Click Restore from backup to launch the wizard and open the Restore Source Device page (see
Selecting the source device ).
Selecting the source device
1. Select the DVD-RW drive on your HP All-in-One Storage System, tape library, or virtual library
where the backup is saved.
2. Click Next to open the Restore Destination page (see Selecting the restore destination ).
Selecting the restore destination
1. Do one of the following:
• Select Overwrite Restore to overwrite the existing data with the backup.
• Select Different Location Restore to save the backup to a different location, and then enter the
location (path) where you want the backup saved on your HP All-in-One Storage System. To
browse for the location, click Browse.
2. Click Next to open the Launch DPX page (see Launching DPX ).
Launching DPX
1. Click Launch DPX to launch Data Protector Express (see Using DPX to restore data ).
2. After the restore is complete, click Finish to exit the wizard.
Using DPX to restore data
1. When the login window appears, do the following:
a. Enter localhost in the Host name field.
b. Enter
ASMbackup
in the User name field.
c. Leave the password field empty.
CAUTION:
Do not set a password for the ASMbackup user account in Data Protector Express.
Setting a password for the ASMbackup user account prevents ASM from communicating
with Data Protector Express, which will cause problems.
d. Click OK.
2. Click Jobs and Media in the Favorites pane, located on the left side of the main window.
3. Double-click ASMbackup on the right side of the main window.
4. Select the restore job for the application or shared folder whose data you want to restore.
NOTE:
To view the properties for a restore job, such as when it was performed, right-click the
restore job and select
Properties.
All-in-One Storage Manager 45