ADTRAN Express XRT - Manual (Page 94)

Appendix C. Status Buffer Messages
80 Express XRT User Guide 61202.153L3-1
Phone # Req'd
Phone number required for AutoSpid determination.
PPP COMPRESSION UP
Unit connected with compression.
PPP LINK LOOPBACK
Network link is looped backed.
PPP Timeout
PPP negotiation failed.
PROTOCOL_ERROR
Call control error.
PUMPIO: dpump-quit
Rate adaption stopped due to DTE error.
Rcv Cause XXX
Undefined cause message received.
REQ_CHANNEL_NOT_AVAIL
The channel type requested is currently not available.
Remote not ISU
Bonding negotiation determined the far-end unit is not another
ISU product.
RESOURCE_UNAVAIL
The requested resource is unavailable.
RESP_TO_STAT_ENQ
Response to status enquiry.
Restarting Rate
Unit restarts DTE rate.
Retrieve
Voice call is retrieved from a holding state.
Ring
An incoming call on either the first or second channel (third chan-
nel if call waiting) entered the Ring state. The calling phone num-
ber is displayed if available.
S cmd not = or ?
Proper syntax not used.