ADTRAN Express XRT - Manual (Page 39)

Chapter 2. Installation
61202.153L3-1 Express XRT User Guide 25
4. Enter ISDN phone number 2.
5. Enable Auto-Detect SPIDs/Switch (this option is only valid in
North America).
6. View the status by using the key sequence Ctrl+V. An illustra-
tion of the status screen is shown in Figure 2-16 on page 26.
Figure 2-15
VT 100 Terminal Configuration Menu
VT 100 Terminal Status Buffer
The status buffer can be displayed at any time after entering the
menu structure. Pressing Ctrl + V displays the Express XRT Sta-
tus menu. The last 20 status messages generated during the oper-
ation of the unit are displayed with relevant status items. See
Figure 2-16 on page 26. Status messages provide information
about call progress, ISDN link status and error conditions. The
most recent status message appears as Status 1, with the remain-
ing status messages appearing in descending order. The status
buffer messages and their descriptions are listed in the appendix
Status Buffer Messages on page 73.
Press Ctrl + C to return to the Configuration menu.